ZA PEELING CENTRIFUGE
MASS FINISHING TECHNOLOGY > PROCESS WATER TECHNOLOGY
FULLY AUTOMATIC CENTRIFUGATION FOR CLEANING YOUR PROCESS WATER
The PLC-controlled peeling centrifuges of the ZA range are your reliable aid for fully automatic process water cleaning. The sludge is separated in a rotating drum and automatically peeled off into a sludge tank. You can set the cleaning cycles individually.
MODULAR DESIGN FOR INDIVIDUAL SOLUTIONS
The ZA range features a modular design, allowing you to flexibly adjust it to your needs. Select the dirt and process water tank, available in a range of sizes, as well as the additional process water pumps, dosing units or a heat exchanger, suitable for both the ZA 04 and ZA 06 configurations.
THE BENEFITS AT A GLANCE
- Centrifuges with up to 2,417 times the acceleration of gravity
- Separation of oil and very fine abraded material < 1 μm through the addition of flocculant media
- PLC for fully automatic operation
- Two configurations:
- ZA 04 with a cleaning power of 1,000 l of process water per hour
- ZA 06 with a cleaning power of 2,000 l of process water per hour
TECHNICAL SPECIFICATIONS
|
ZA 04 |
ZA 06 |
|
|
Capacity (l/h) |
1,000 |
2,000 |
|
Sludge volume (l) |
14 |
28 |
|
Centrifugal rating (g) |
1,920 |
2,417 |
|
Mud water tank (l) |
800 |
1,500 |
|
Process water tank (l) |
400 |
1,000 |
|
Drive system |
direct drive |
v-belt drive |
|
Overall dimensions (mm) (LxWxH) |
1,700 x 2,500 x 2,100 |
2,100 x 3,000 x 2,350 |
|
Connected loads (kVA) |
17 |
17 |
|
Motor power average (kW) |
2 |
5 |
